700R4 install question??? about electric plug - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Matty Wagz · 03-27-2014, 07:27 AM

Hello All, just got a low mileage; clean; GM Goodwrench 700R4 trans... i understand what i need to do as far as driveshaft shortenend, change/ move cross member, etc;

I wanted to ask all the Gurus what i needed to do with the 4 wire plug here on the driver's side of the trans? I have heard that you need to loop out certain pins here/etc to keep it from locking up??

Also, am i correct in just thinking I can get an electronic speedometer to connect to the sending unit on the trans?

thanks in advance,

WAGZ

03-27-2014, 07:27 AM	#1
Matty Wagz Registered User Join Date: Nov 2009 Location: Lititz, PA 17543 Posts: 182	700R4 install question??? about electric plug Hello All, just got a low mileage; clean; GM Goodwrench 700R4 trans... i understand what i need to do as far as driveshaft shortenend, change/ move cross member, etc; I wanted to ask all the Gurus what i needed to do with the 4 wire plug here on the driver's side of the trans? I have heard that you need to loop out certain pins here/etc to keep it from locking up?? Also, am i correct in just thinking I can get an electronic speedometer to connect to the sending unit on the trans? thanks in advance, WAGZ Attached Images __________________ Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally used up and worn out, shouting '...man, what a ride!' GC

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.