Mechanical clutch and header clearance? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pillow · 05-21-2014, 12:07 PM

I know there are a gazillion header threads out there, but none that I could find addressed mechanical clutch linkage issues...

Does anyone out there run a mechanical clutch out there have some insights? I figure a few folks wanted to stay with 4 speed Muncies or T5 conversions... Maybe even a 3 speed left in the mix

I will be running the Scoggin Dickey LS mechanical mounts. Again only kit I have found for this. Behind it will be a T5.

Any insight is greatly appreciated!!!

Hopefully with the long weekend I can get the motor placed in to take a look at clearances... And post a pic.

05-21-2014, 12:07 PM	#1
Pillow Registered User Join Date: Apr 2006 Location: Warrenton VA Posts: 144	Mechanical clutch and header clearance? I know there are a gazillion header threads out there, but none that I could find addressed mechanical clutch linkage issues... Does anyone out there run a mechanical clutch out there have some insights? I figure a few folks wanted to stay with 4 speed Muncies or T5 conversions... Maybe even a 3 speed left in the mix I will be running the Scoggin Dickey LS mechanical mounts. Again only kit I have found for this. Behind it will be a T5. Any insight is greatly appreciated!!! Hopefully with the long weekend I can get the motor placed in to take a look at clearances... And post a pic. __________________ '71 C-10 with 5.3 LS2 cam & NWC T5 - Patina King! '83 Jeep Cherokee w 5.3 LS9 cam & SM465 NP208 swap in progress '92 Volvo 960 wagon w 5.3 LS7 cam & WC T5 swap in progress '79 Porsche 911 SC '48 Spartan Mansion 30' travel trailer '10 Porsche Cayenne S - Daily

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.