Hydroboost adapter fitting help, please

[earl84]

I recently installed hydroboost on my 66 C20 and want to change the return fitting to a 90 degree fitting right out of the booster. I did some hard looking last night, and the only thing I can find is on Hydratech's site for $21.95 plus shipping. I'll pay it if I have to, but dang, it's just two fittings. Here's a description of the fittings:
o 5/16-24 O-ring Male to 1/8 NPT Male, Surface seal type adapter with O-ring seal (I believe this is called a BOSS fitting). This then connects to:
o 1/8 NPT Female 90 Degree 3/8 Push On Hose Barb Fitting

If there is another fitting, such as a 5/16-24 with a 90 degree bend to a 3/8 barb fitting, that would be even better, less connections is better.
I appreciate help with this. I ask that you give very specific information, not just a website, I looked at about 20 websites last night trying to find these. That's not too demanding, is it? Haha
Here's a link to a pic of what I am talking about. They call it "HYDRATECH HBS9100 LOW PROFILE RETURN LINE HOSE NIPPLE"

http://www.hydratechbraking.com/hose...gs/imag039.jpg