Clutch problems

[Ronw435]

I am having a problem getting the clutch adjusted to allow dis-engagement of the clutch when trying to shift into gear. When I purchased the truck the clutch worked fine except for the fact that the clutch pedal was much higher than the brake pedal. The manual says that they are to be at the same height. I have checked and repaired all the attachment points with bushings to make sure that there is no play in those areas. I have changed the position of the clutch push rod nut from the inner to the outer position on the clutch fork. Still without raising the position of the pedal to allow more travel it still will not dis-engage. I have adjusted the clutch to within 3/16" play.

Any ideas?

Ronw435