Carb issues with secondaries

[IndifferentJester]

Sadly no luck at the junkyard, they used to have 2 C10's (or even similar trucks of the time) but I guess they scrapped em.

Originally Posted by Bigdav160

Something doesn't look right with the cam on the throttle shaft

What do you mean?

Thanks Mr. Handy and Geezer.

Originally Posted by Wrenchbender Ret

The choke heat coil is supposed to over ride the spring on the pulloff. Often they don't. I have cut a few coils out of the spring on the pulloff many times to solve this. The choke must open fully to disengauge the lockout.

Not entirely sure what you mean. I'm still learning what the parts are called and more so a visual learner as well.

Also, is the cam - fast idle suppose to be loose? I understand the screw to adjust the tension depending upon what idle increment you want but there's really nothing making it go down towards the engine block except gravity. If it helps the casting number on it is 7041209.

Thanks again dealing with my inexperience. Also posted some close ups below just to see if I put it back together.