Panhard Bar Bushing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Paul Mitch · 06-23-2015, 12:42 AM

I have a 65 C10 with a c-notch and air ride suspension.
I installed an adjustable Panhard bar, set the truck at a comfortable ride height and adjusted the bar to that length and installed it. I use this truck as a truck as well as a cruiser. I noticed the truck starting to shake recently and got underneath it. I noticed the panhard bar (on the pumpkin side) bushing had disintegrated. Does anyone have any insight as to what might have caused this? It was a rubber bushing.
Thanks
Paul

06-23-2015, 12:42 AM	#1
Paul Mitch Registered User Join Date: Sep 2014 Location: Clayton Ca Posts: 22	Panhard Bar Bushing I have a 65 C10 with a c-notch and air ride suspension. I installed an adjustable Panhard bar, set the truck at a comfortable ride height and adjusted the bar to that length and installed it. I use this truck as a truck as well as a cruiser. I noticed the truck starting to shake recently and got underneath it. I noticed the panhard bar (on the pumpkin side) bushing had disintegrated. Does anyone have any insight as to what might have caused this? It was a rubber bushing. Thanks Paul

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.