Introducing-Junkyard Tech episode 1!!!!

[gmachinz]

Ok...so if a lot of you are like me, you enjoy perusing your local junkyard looking for later model upgrades for your square, right?
Well, here's a little project I did in literally one hour just to see how it would turn out....the mission?

Adding a stout electric fan to an otherwise stock fan shroud assembly to negate the need for fabbing up some custom mounting brackets for the fan assembly itself.

So, here's your checklist of what you need:

1.) A Tbird or Mark 8 electric fan assembly
2.) Stock truck shroud (I used a BB one but a SB one should work as well)
3.) Drill with a 1/4" drill bit
4.) Rivet gun
5.) 1/4" rivets, 3/4" length and washers
6.) PVC saw
7.) Dremel w/cutoff wheel