|
10-05-2015, 06:42 PM
|
#1 |
|
Registered User
Join Date: Dec 2011
Location: Kansas City, Mo
Posts: 160
|
Not Level
My 66 has that normal right hand lean that most of these old trucks have but if it were caused by the body mounts, I wouldn't think that I would have the issue I have. I cut one coil off my CPP 3" springs to bring the front end down. On the drivers side, I was about 1/4" from sitting on the bump stop perches. I had already removed the rubber stops. On the pass side, I still had about an inch and a half of clearance. Any idea why I'm so much lower on the drivers side?
  
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode