|
|
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
Vandals909 1973-1987 Motor Mounts 11-08-2015, 10:28 PM
Vandals909 Re: 1973-1987 Motor Mounts 11-09-2015, 12:17 PM
MalibuSSwagon Re: 1973-1987 Motor Mounts 11-09-2015, 02:44 PM
Vandals909 Re: 1973-1987 Motor Mounts 11-09-2015, 04:37 PM
Ski-me Re: 1973-1987 Motor Mounts 11-09-2015, 05:23 PM
Vandals909 Re: 1973-1987 Motor Mounts 11-10-2015, 07:55 PM
bmchevy1979 Re: 1973-1987 Motor Mounts 11-10-2015, 09:51 PM
Axle Re: 1973-1987 Motor Mounts 11-22-2015, 12:00 PM
|
11-08-2015, 10:28 PM | #1 |
Registered User
Join Date: Sep 2005
Location: So. Cal
Posts: 321
|
1973-1987 Motor Mounts
I have a 1971 C10 that I will b e putting an Lq4 LS motor in. I have decided to use 1973-1987 c20 frame brackets and motor mounts along with some dirty dingo slider mounts for an LS engine.
Questions. I purchased the frame brackets and motor mounts from a local Pick a Part. I felt they were pretty expensive. The frame bracket which the clamb shell mount bolts to was cheap at $8 each. However the motor mounts which are outside metal with a rubber inside where $15 each. They rubber inside is shop and would need to be replaced. I see that Energy suspension makes a poly inner replacement for $25 on rock auto. However I also see Rocket Auto has the entire mount for $6.14 each with metal and new inner rubber DEA #A2292HD. Are they mounts for $6.14 good and strong as the orignal C20 mounts with a new energy suspension poly mount? If the pick apart will take back the $30 mounts I bought from them (doubt it), I would just buy the new mounts and save almost $30 after taxes and fees. Hope this makes sense. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|