wiper motor/ washer pump route? connection?

[[JP]]

Hi there,
on this new to me 66 chevy I took the wiper motor off to repair the bulkhead as it has correded, when doing so I've noticed it has a washer pump connected to it?



There was no hoses connected to it, and previously to knowing there was a washer pump connected I ordered a universal washer kit, but seeing as mine seems to have a pump I'd rather use that...

thing is, I dont know what hoses to connect where or how the standard setup is as there's not even a washer jar on the truck.

does anyone know how all is connected? the wiring is there, just the hoses missing and bottle...I could also test the washer pump while the pump is out, but would be good to know, again, what hoses are connected to what as there's 3 outlets at the top of the pump

from the little I've found online is one hose to the bottle and the other 2 houses to each water jet?
so, is the operating system that one hose will suck the water out the washer jar, into the pump, and then out the 2 other hoses?

Oh.. and another question, how is it mounted on the truck? seeing as the plate rusted out...
are the hoses facing up? or to the side?


thanks!