Trying to salvage the OEM Harness - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 05-13-2016, 06:24 PM

2003 Yukon.
I want try to use my OEM harness before spending 600 on a aftermarket. I'm pulling it now. Question is, I have it disconnected from the junction box in the cab just to the left of the column, disconnected from the column and the fusebox on the left side of the dash. And pulled the dbw and the obd plug. But a big chunk of it goes up in the dash towards the speedo cluster. Doi need to fish out all that too or just cut it?

05-13-2016, 06:24 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,863	Trying to salvage the OEM Harness 2003 Yukon. I want try to use my OEM harness before spending 600 on a aftermarket. I'm pulling it now. Question is, I have it disconnected from the junction box in the cab just to the left of the column, disconnected from the column and the fusebox on the left side of the dash. And pulled the dbw and the obd plug. But a big chunk of it goes up in the dash towards the speedo cluster. Doi need to fish out all that too or just cut it? __________________ 1967custom

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.