Frame to Cab measurements - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Wgesnerjr** · 08-24-2016, 09:10 AM

Hi all,
Currently my Frame and Cab are separated like divorcing parents.

Can anyone help me out with some Frame to Cab floor measurements? Hopefully from a truck with NEW body bushings? This would be in the area of the transmission cross member and need to be from the top of the Frame Rail to the bottom of the Cab Floor.

I am starting to run my new fuel lines and need to know if there is enough room between the Catalytic Converter shield and the floor.

Thanks,
Jay

08-24-2016, 09:10 AM	#1
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	Frame to Cab measurements Hi all, Currently my Frame and Cab are separated like divorcing parents. Can anyone help me out with some Frame to Cab floor measurements? Hopefully from a truck with NEW body bushings? This would be in the area of the transmission cross member and need to be from the top of the Frame Rail to the bottom of the Cab Floor. I am starting to run my new fuel lines and need to know if there is enough room between the Catalytic Converter shield and the floor. Thanks, Jay Attached Images __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.