4L60E Tech

[clinebarger]

Member Low Elco wanted too know whats involved in turning a 4wd 4L60E into a 2wd 4L60E. If anyone else has any requests for any 4L60E related tech.....I will answer them here.

The 4L60E is the EASIEST trans too convert from 4wd-2wd or vice versa.

PARTS.....
2wd Output Shaft W/ 40 tooth Reluctor wheel.
2wd Extension Housing.
VSS Sensor.
6 10mm-1.50 bolts about 1"/25mm long.

TOOLS....
Torx Plus 50 socket to remove the bellhousing bolts.....DO NOT try to use a standard Torx bit! A strong Impact is recommended for removal, Torque to 35 ft lbs upon assembly.
10mm socket
13mm socket
15mm socket
Pocket sized flat screwdriver
Regular size flat screwdriver
Lock Ring Pliers with a small 90 degree tip.

Get the trans in vertical position, A hole in a work bench, Or a Flexplate over a 5 gallon bucket for the output shaft to stick through.

Remove the Torx Plus bolts holding the bellhousing. Black bolts in the pic, Remove bellhousing.