Shockwave/Camaro clip possible issue

[bluetrim]

I am having a local shop install a Ridetech kit I bought from MCB. I purchased the truck recently that has already been clipped but I wanted to be able to have the ride height adjustable. The rear was flipped and a c notch installed buy hardly no travel, very rough ride, and bottomed out so I sprung for the full kit that included the 4 link set up.
The issue now is that the truck may be even lower than it was previously before the shockwaves. I went over to have a look and snapped some shots of the graft that the previous owner did. The shop has called Ridetech to see what our options are but after looking at several camaro clip installs on here, mine do not look anything like those. Can you guys look at what I bought here and give me your opinion? My objective was to have a good ride that would corner well and still be able to get over speed bumps when I needed to. I will add a picture of the stance when I bought the truck last month. It looks to me that the subframe job should have had the bottom of the clip level with the bottom of the frame.

Is a longer shockwave going to fix this problem?
Do I even have a problem?
Am I screwed?

I am new at this so take it easy on me.