No Power To The Key Switch

[1972k10shortbed]

Guys I've messed around with the wiring on one of my Blazers and I just can't get the key switch to turn over the starter. I've tested power to the fuse panel switched power and don't have power there either.

While I was testing things I noticed neither plug for the neutral safety switch are on the column. I crossed both plugs over with wire, since the neutral Safety Switch is gone on my column and no luck there either. I am going to replace the column with one that has the switch though.

However when I turn the keyswitch, the fuel gauge goes crazy and reads way past full. I replaced the forward lamp harness and since I'm doing an LS swap, the only wires I need from the engine harness are the starter wires and fan blower motor. The Engine Harness came from a running driving truck so I know its good.

If anybody has any ideas, I'd REALLY appreciate the help.

THANKS, Hunter