|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
04-21-2004, 12:02 AM
|
#2 |
|
california fill
Join Date: Apr 2004
Location: Sunny So-Cal
Posts: 694
|
Sounds to me like the pinion gear on the starter isnt engaging the teeth of the ring gear enough. In which case you need to cut a shim in half (or thirds or maybe even a quarter) and just shim the outter starter bolt.. That will rotate the pinion into the ring gear. I would try 2 shims and see where you're at..
pc |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode