|
Center support bearing question
Before i go to the trouble of changing my CSB should there not be any movement within the bearing? Seems like the bearing is fine but the rubber around it seems a little "spongy" and therefore there is play inside the housing itself. is this normal or should i not be able to move either side of the driveshaft within the bearing carrier? Sorry i had posted this on an old thread titled carrier bearing that was from 2015 and no response so i thought i would start a new in hopes someone could help. Thank You guys i have taken the driveshaft assuming it was bad already but i have taken it apart yet. and yes i did mark orientation.
|
02-20-2018, 02:31 PM
Threaded Mode