Factory Clutch Bellcrank Pictures? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CRGRS 66 · 04-28-2018, 03:55 PM

Hey guys, CRGRS 66 here, I am hoping to get some help from you guys with my clutch linkage, particularly the bell crank, and how it is mounted to the frame. I have a GM crate engine, just the regular 260HP 350, and the tapped hole on the block is in a different location than my old 66 283 was. . The 63-66 Bellcrank has a bend in it, the 73-87 Bellcrank is straight. I am thinking that I will order the 73-87 Bellcrank from Classic parts, but would like to see if the frame bracket on the 73-87's is the same as mine. Classic Parts lists the stud for the block as the same part number for 63 thru 87, so I should be good there.
Thanks in advance!

04-28-2018, 03:55 PM	#1
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Factory Clutch Bellcrank Pictures? Hey guys, CRGRS 66 here, I am hoping to get some help from you guys with my clutch linkage, particularly the bell crank, and how it is mounted to the frame. I have a GM crate engine, just the regular 260HP 350, and the tapped hole on the block is in a different location than my old 66 283 was. . The 63-66 Bellcrank has a bend in it, the 73-87 Bellcrank is straight. I am thinking that I will order the 73-87 Bellcrank from Classic parts, but would like to see if the frame bracket on the 73-87's is the same as mine. Classic Parts lists the stud for the block as the same part number for 63 thru 87, so I should be good there. Thanks in advance! __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.