1074 C10 Fuel Tank - LSx Swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

epfatboy · 05-08-2018, 08:09 PM

Swapping out the tank in my '74 for a '87 tank and sending unit.

What filler necks are being used, I plan to keep my stock filler location. I'd try to reuse the original but it's a little banged up so I figured I'd replace it.

One idea I had was to use a flexible aluminum radiator hose with rubber couplings but I was wondering if there is any safety issues with that. Something like this.

https://www.jegs.com/i/JEGS/555/5112...RoC7-4QAvD_BwE

05-08-2018, 08:09 PM	#1
epfatboy Registered User Join Date: Mar 2018 Location: Barrington nh Posts: 114	1074 C10 Fuel Tank - LSx Swap Swapping out the tank in my '74 for a '87 tank and sending unit. What filler necks are being used, I plan to keep my stock filler location. I'd try to reuse the original but it's a little banged up so I figured I'd replace it. One idea I had was to use a flexible aluminum radiator hose with rubber couplings but I was wondering if there is any safety issues with that. Something like this. https://www.jegs.com/i/JEGS/555/5112...RoC7-4QAvD_BwE

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.