The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-10-2018, 09:10 PM   #1
NeverDone50
Registered User
 
Join Date: Aug 2014
Location: Overland Park, Kansas
Posts: 30
More carb problems!

So I have a 292 swapped into my 50 3800 and i recently bought a new monojet for it. Ive adjusted everything to spec closest to the year the motor came from (67 c20) and rechecked everything. But this motor didn't originally come with the monojet, it just came with a rochester B. Anyway, it ran once but hasnt ran since. I've completely disassembled it and cleaned it out. So I put it back on and it started spitting back through the carb. I adjusted it more rich until it stopped and it gets close to starting, but wont. Any ideas? All the vacuum ports are capped except for the vacuum advance and my vacuum gauge. New gas lines and mechanical fuel pump. Another side note, it was acting like it was flooding before I tore it down and cleaned out the carb.
NeverDone50 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:41 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com