![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Aug 2017
Location: Eugene Oregon
Posts: 128
|
RH Blinker won’t blink with headlights on
1969 c10 I’ve seen some variations of this question on here but never the same with a solution..
blinkers all work fine with lights off, with lights in the driver side works but passenger doesn’t. Back all work fine with way. I have applied a ground wire from each sides housing to the frame, and made better grounds from firewall to engine as what I had was pretty chewed up. The lights got brighter for sure but the problem remained Is there another ground I should check/replace? Is there a ground from engine to chassis? As I’m thinking about it now I don’t think I did that when I put an engine in this summer I swapped to auto trans so I have an auto column out of another 69 (I think) but the wiring was different I had to get a straight to moon adapter What would you check next?
__________________
1977 SWB (c20 conversion) SBC350 Springfield Oregon Instagram: @nevernotchevy |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|