1/2 ton suspension on a 3/4 ton frame? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

REPO1 · 06-07-2002, 12:02 AM

Ok, ok.......

I know this has been discussed 10000 times on here, but I just wanted to clear something up in my head.

Still considering swapping my 3/4 ton suspension out to 1/2 ton suspension. So I am planning on pulling the A-arms, spindles, calipers, rotors, and all steering linkages off of a '75-'87 Chevy 1/2 ton truck. These parts should bolt up, correct? Are there any small issues that I have to keep an eye out for? Like steering box or anything?

Thanks all!!

Reid

06-07-2002, 12:02 AM	#1
REPO1 Shortbox wanna-be. Join Date: Mar 2002 Location: Fort St.John, British Columbia, Canada Posts: 773	1/2 ton suspension on a 3/4 ton frame? Ok, ok....... I know this has been discussed 10000 times on here, but I just wanted to clear something up in my head. Still considering swapping my 3/4 ton suspension out to 1/2 ton suspension. So I am planning on pulling the A-arms, spindles, calipers, rotors, and all steering linkages off of a '75-'87 Chevy 1/2 ton truck. These parts should bolt up, correct? Are there any small issues that I have to keep an eye out for? Like steering box or anything? Thanks all!! Reid __________________ 1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.