|
08-02-2020, 12:28 PM
|
#36 |
|
Registered User
Join Date: Jul 2020
Location: Pennsylvania
Posts: 54
|
Re: 4x4 LS cross member
Correct. My Np205 is bolted back in the factory location with the advance adapter kit installed. You will have to shorten the cross member some. I measured it up to find out about where the cross member would mount and put it in the frame before sitting the engine/trans. Position the cross member so the dip points to the front. It will hit the oil pan if it is pointed to the rear.
Last edited by Acregger; 08-03-2020 at 12:23 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode