Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-08-2020, 07:58 PM | #26 |
Moderator
Join Date: Aug 2017
Location: Cabarrus
Posts: 418
|
Re: Bosch Hydromax brake booster info
Got called off work Friday so used my free day to swap in the 1.75" bore master cylinder. After carefully measuring push rod depths we needed to put a .055" spacer between the master and booster to be flush. I used 4 lock washers that measured .080" leaving me with .025" before the pushrod touches. A gallon of brake fluid later she was ready to for the road...
It felt more or less the same, had slightly better pedal travel and more control over braking force. Not sure if it was worth the hassle of swapping but oh well. 1st pic is 1.75" master 2nd pic is 2" master still installed 3rd pics is hydroboost pushrod 4th pic is pushrod side view 5th pic shows lock washer "spacers" installed circled in red
__________________
Alex 1967 C50 292ci Lumber truck 1967 C50 292ci Dump truck 1967 C60 366ci Fire truck Last edited by CarolinaHD; 08-08-2020 at 08:11 PM. |
Bookmarks |
Tags |
c40, c50 1967 1972 hydroboost, c5500, c60, conversion, kodiak, topkick |
Thread Tools | |
Display Modes | |
|
|