03-24-2021, 07:07 PM | #1 |
Fa'a Samoa
Join Date: Apr 2006
Location: GA
Posts: 214
|
Squarebody Shopping
I'm looking for a truck and have narrowed it down. Not interested in a project. Prices have changed a lot over the years so I'm not sure what's reasonable anymore. I've provided links to pictures and given seller provided descriptions for each. If you see any red flags please point them out. Could those of you that are willing, please give your opinon as to what a fair offer would be for each? Thanks.
$15,500 now $14k. Lowest he says he will accept. https://www.dropbox.com/sh/69t41ljiu...l56IR-t2a?dl=0 HAS VIDEO 1987 GMC R 1500 5.0 V8 The heads, head gasket, water pump, lifters, pushrods and associated gaskets were done about 2 years ago. The fuel tanks, filters and pumps were done 6 years ago and the TBI fuel injection system was rebuilt recently. It does have some surface rust in the usual places (door Jambs) but nothing rusted through. Super clean truck, but clear is peeling on hood. Interior is 10/10. 4.5/6 drop kit, brand new us mags all around 20x8/20x10 with new tires all around! Power windows and locks. AC and both tanks work. Initial price $25k then 21k now $20,500 says that's as low as he will go. I'm leaning towards this one because I couldn't duplicate it myself at that price considering I wouldn't be able to do the work myself. https://www.dropbox.com/sh/t9l7pi2xb...mSu5pivWa?dl=0 1986 Chevy factory short bed, two wheel drive truck showing 82288. Not sure if they are correct miles, has been LS swapped with a 5.3 V8 and 4L60E auto trans out of a 70000 mile truck. Power steering, power brakes, air, tilt, and American Auto Sound retro stereo. Frame was painted. 100% rust free all original body panels and original tan paint with some killer patina. All new door to door interior from TMI, with new inside trim. New wheels and tires, American Racing wheels. Front tires 245/45/20, Rear tires 295/40/20 Has 4" front drop, 5" rear drop , perfect stance. Everything works, runs and drives. Seller says he is Rod Parsons and was in some way involved with the build of this Zl1 C10 show truck. https://www.hotrod.com/articles/powe...967-chevy-c10/ Last edited by malosiaga; 03-31-2021 at 02:19 PM. Reason: Edit |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|