Questions about using adjustable proprtioning valve. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

johnymac · 06-10-2002, 11:33 AM

I have just converted my truck to power disc brakes. 1967 C10.
I have replaced the old proportioning value with a Wilwood adjustable one.

I am curious, took a wire off the old proportioning valve. Thinking this must be a low pressure valve. Not sure if I should try and buy some kind of a replacement. Figured I had better ask before I finish with the brake lines.

Has anyone replaced stock prop valve for and adjustable and found a solution for this ?

Any suggestions ?

Thanks much!!

06-10-2002, 11:33 AM	#1
johnymac Registered User Join Date: Mar 2001 Location: Dover, NH USA Posts: 194	Questions about using adjustable proprtioning valve. I have just converted my truck to power disc brakes. 1967 C10. I have replaced the old proportioning value with a Wilwood adjustable one. I am curious, took a wire off the old proportioning valve. Thinking this must be a low pressure valve. Not sure if I should try and buy some kind of a replacement. Figured I had better ask before I finish with the brake lines. Has anyone replaced stock prop valve for and adjustable and found a solution for this ? Any suggestions ? Thanks much!! Last edited by johnymac; 06-10-2002 at 09:50 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.