Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-30-2021, 10:03 AM | #16 |
Moderator
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,888
|
Re: "Root Beer Float" 1976 Scottsdale
I don't have a ton of progress to update because unfortunately I hit a snag with the wiring. I obtained two dash harnesses, one from a board member out of a '77 and the other locally that was supposed to be from a '76. The '77 it turns out is quite a bit different and it had some cuts and splices. The '76 harness looked identical and was completely uncut, had all the same connectors, and looked plug and play but after I installed it I had no power. After some investigation I determined that it was actually a '75 harness and the harness is pinned different between '75 and '76. I can make the engine harness match, but it's going to be a chore.
I did get the tires and rally wheels mounted, and did a quickie resto on the gauge cluster. Plus I installed Cerwin Vega 6x9 speakers in new cab corner brackets and a new Retrosound 4x6 dual voice coil speaker in the dash. I found a decent original seat under that cover except a small tear and decent carpet. I also bought some sport mirrors, new sill plates, and door seals. I can't wait to get the electrical sorted and driving again, but this is definitely not my favorite work. It does make me feel good to make everything "work" like it should.
__________________
'20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids
Last edited by LEEVON; 11-30-2021 at 10:14 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|