Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-08-2022, 12:50 AM | #1 |
Revitalizing a 6T C10
Join Date: Aug 2017
Location: Santa Barbara, CA
Posts: 223
|
Stock 3 Speed Standard transmissions
Hey All,
The three speed in my truck ( which I believe to be the stock one) is quite un-happy ( second gear has been almost impossible for a while, and first doesn't want to stay engaged without some serious help ) I put a feeler up on one of the local face book groups (looking for a 60-66 3 speed) and got two people that have transmissions that seem to fit the criteria. If I remember my research from when I got the truck correctly, these were available with either a muncie or a saginaw 3 speed transmission. Without having my hands on these transmissions, does anybody have any insight if they are interchangeable? I am trying to see if I can swap one without having to modify the driveshaft if possible ( as much of a bolt in as I can get). I would like to do a 5 speed swap eventually, but at this point, I would be happy to be able to drive it for a bit longer, and not work on the logistics of driveshaft and clutch master and rear diff that should be done at the same time... Thanks! Keep on Trucking!!
__________________
1960 C-10 Apache- "Rusty the Redneck Reject"
1/2 Ton short bed step side. 350 crate motor, 3 speed manual (floor shifted) MKII - Buddy Buckets and Glass Packs 20+ year long term project in process Lots of Rust, more memories... |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|