Front Crossmember Swap

[theomajigga]

Swapping 4wd k5 to 2wd.

Full Parts 88 suburban, 2wd.

Moved front crossmember over, and got it lined up in the rear bottom hole (where the k5 brake line used to go through) wheels look centered also.

The engine perch when set on the bottom of the subframe is about 1inch too high on the frame rails? What should I be doing here? Going to be dropping in a 5.3/4l60e. Have the square body swap mounts and new clamshells.

Any help appreciated.