Raditator Problems! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cheesewagon · 11-07-2004, 02:30 AM

Hi All, I picked up a new 4 core raditator for my old burb. It was my plan to reuse in my '72 Cheyenne when I put it back on the road in the near future.

But when I went to put it in the top and bottom rubber/ steel mounts will-not fit it. Is there such a thing as larger mounts? It had a 3 row in it to start with. And after putting in the heater core I see what you guys are talking about it being larger. But the it fit just fine with a little old yankee enginering.

I made new brackets for inside with large coat hangers that I threaded for 6/32 nuts on the end. Any help on this matter would be great.

Thanks much, Tom.

11-07-2004, 02:30 AM	#1
Cheesewagon Senior Member Join Date: Jan 2002 Location: Perrysburg, Ohio, USA Posts: 409	Raditator Problems! Hi All, I picked up a new 4 core raditator for my old burb. It was my plan to reuse in my '72 Cheyenne when I put it back on the road in the near future. But when I went to put it in the top and bottom rubber/ steel mounts will-not fit it. Is there such a thing as larger mounts? It had a 3 row in it to start with. And after putting in the heater core I see what you guys are talking about it being larger. But the it fit just fine with a little old yankee enginering. I made new brackets for inside with large coat hangers that I threaded for 6/32 nuts on the end. Any help on this matter would be great. Thanks much, Tom. __________________ '91 suburban 350 TBI - R 700 4 new daily driver '72 Cheyenne Super 49,000miles 350/350 frame up resto w/ matching numbers.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.