11-14-2004, 10:47 PM | #1 |
Registered User
Join Date: Oct 2004
Location: Currently New Windsor, NY but Texas is home
Posts: 332
|
Starter Question
I recently put my long tube headers on my '71. When I was doing the passenger side I had to remove the starter. I carefully took the starter down being cautious to not let it hang by the wires. I noted that it had the main power connection from the battery and also a yellow wire on a smaller connection. I marked the little connection the yellow wire went on. When going to put the starter back in I ran across a broken brown wire that looks like it needs to be hooked on the other small connection on the starter. Does this wire need to be hooked up or not? I traced it up to somewhere behind the distributer. I don't know if it goes to the points style distributer or something I am missing. The truck starts and seems to run fine. No missing, sputtering, backfiring, or anything.
What is or was this wire for? Do I need it? Thanks for the help, Steven
__________________
2002 Silverado 2500HD LB7 CCSB LT EFI Live by Rob at ATP, Edge CTS Insight DSP 5 control, S&B CAI, PPE boost valve, Pro Fab AIH, AirDog II 165, PPE WIF sensor delete plug, 5" stainless exhaust, Cognito braces & HD tie rods, H2's 315/70 R17 BFG's 2004 Tahoe LT 2006 Silverado Z71 LS 1971 Chevy C10 |
Bookmarks |
|
|