Strange Brake Bleeding issue.

[r0lf-]

Ok guys, So I replaced the cut brake line and im trying to bleed the brakes. But something really strange is happening. I bled the brakes last night again after I tried to temp fix and that was a no go, it was leaking a little so I just went ahead and replaced everything. But I tried to just move it out of the garage and when I turned on the motor the pedal went straight to the floor and only broke when It was pretty much all the way down. Like 90% of it was just some dead spot.

So I figured I just needed to do it right. I put the new line in tonight and im trying to bleed it now. I have the valve open at the rear right wheel and I pump the brakes and Nothing, im lucky to get just a tiny bit of fluid out.

I have power brakes and checked all the vaccum connections, but that should have nothing to do with anything when the car is off.

Any ideas?