My truck wont start

[DM310]

hey guys, as some of you know I just purchased a 63 c10 w/ a 292 3 on the tree. Well the truck has been sitting for the past 6+ years and I dont believe it has started since then. the guy i bought it off of said he tried starting it not that long ago but would not start b/c of the carb. Well I just rebuilt the car and did a full tune up. Installed a new battery then went to start it and nothing. It would not turn over. I have power at the ign switch and also 12 v on the starter sol wire at the ign sw when in the start position. I checked down at the starter and dont have voltage on either of the 2 wires at the start solinoid. Now my question is, is there a clutch solinoid or anything like that, that wont allow the car to start? If not then I guess I just have a open some where between the ign sw and the starter. Any help would be great. Thanks