Hesitation? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

784X4GUY · 03-09-2005, 04:35 PM

I once again need yall opinions, If I get into the gas nice and slow it doesn't hesitate to rev at all. But if I jump on the gas from a idle it will hesitate a little bit. What should I check out and also I have just a old 350 with about 50k on it. Well it has the eldebrock intake and carb. It also has a "rv" cam in it not much at all no lope really. I was wondering what should the timing be set to? I believe I have it set to about 10 degrees BTDC right now with I think the 25 degree bushing in the distributor. What should total timing be at on a motor like this? Thanks...Mike

03-09-2005, 04:35 PM	#1
784X4GUY Did someone say MUD? Join Date: Aug 2003 Location: Pullman,WA Posts: 1,089	Hesitation? I once again need yall opinions, If I get into the gas nice and slow it doesn't hesitate to rev at all. But if I jump on the gas from a idle it will hesitate a little bit. What should I check out and also I have just a old 350 with about 50k on it. Well it has the eldebrock intake and carb. It also has a "rv" cam in it not much at all no lope really. I was wondering what should the timing be set to? I believe I have it set to about 10 degrees BTDC right now with I think the 25 degree bushing in the distributor. What should total timing be at on a motor like this? Thanks...Mike __________________ Im in the market guys...so keep ya eyes peeled -------------------- Mini trucks are for guys who cant get it up!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.