Aftermarket gauge wiring question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mocwon · 03-10-2005, 10:01 AM

I'm starting to install Autometer gauges and have a question about the wiring to the instrument cluster. According to the wiring diagram I have:
* Light Blue wire, 14B is the left turn signal
* Dark blue, 15B is the right turn signal
* Light Green wire, 11B is the high beam indicator
* Brown wire, 25 is the alternator indicator light
* Pink wire, 39 is the ignition switch feed controlled
* Tan wire, 30 is the fuel level
* Blue wire, 31 is the oil pressure
* Gray wire, 8A is the instrument panel lights
* Tan wire, 33B is the brake warning lamp
* Dark green wire, 35B is the water temperature

My question is; where does the pink wire (39) tie into the new gauges since the factory connector and printed circuit are gone?

Thanks

03-10-2005, 10:01 AM	#1
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Aftermarket gauge wiring question I'm starting to install Autometer gauges and have a question about the wiring to the instrument cluster. According to the wiring diagram I have: * Light Blue wire, 14B is the left turn signal * Dark blue, 15B is the right turn signal * Light Green wire, 11B is the high beam indicator * Brown wire, 25 is the alternator indicator light * Pink wire, 39 is the ignition switch feed controlled * Tan wire, 30 is the fuel level * Blue wire, 31 is the oil pressure * Gray wire, 8A is the instrument panel lights * Tan wire, 33B is the brake warning lamp * Dark green wire, 35B is the water temperature My question is; where does the pink wire (39) tie into the new gauges since the factory connector and printed circuit are gone? Thanks __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.