Help- Rear Disc Brakes Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fastbagged68 · 03-24-2005, 01:30 PM

I pulled my rearend out to put my TSM Disc Brakes on my 63 suburban and have a issues.... How are your backing plates attached to your axles....Mine are pressed on or welded on. It is suppose to be bolted to a flange, but I don't have a flange. Does anyone else have the same rearend as myself. This is the orignal rearend. I do not want to replace the housing. It has too much welded to it! Any info on these rearends

03-24-2005, 01:30 PM	#1
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Help- Rear Disc Brakes Question I pulled my rearend out to put my TSM Disc Brakes on my 63 suburban and have a issues.... How are your backing plates attached to your axles....Mine are pressed on or welded on. It is suppose to be bolted to a flange, but I don't have a flange. Does anyone else have the same rearend as myself. This is the orignal rearend. I do not want to replace the housing. It has too much welded to it! Any info on these rearends



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.