cam selection help...ASAP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevyhouse · 08-08-2002, 08:55 PM

i rubbed a lobe off my cam today, and i need help picking a new one. it has to go in tomm so time is critical. i had a crane energizer, .454 lift 292 dur. the engine is a 388ci stroker, 10.2-1 compresion, 5.7" rods, ported iron heads, 1.6 roller rockers, edlebrock rpm intake and 750 performer carb, GM HEI, dynomax 1 1/5"-3" headers to dual 3" exhuast and flowmaster 40's. this is driven almost everyday so streetablity is very important but of course i would like a good lope and lots of power. thanks for your help, i am pulling out of fla on weds. headed for kansas so of course the timing couldn't be better.

kurt

08-08-2002, 08:55 PM	#1
chevyhouse BEER-Vacation in a can... Join Date: Jun 2001 Location: wichita, ks Posts: 444	cam selection help...ASAP i rubbed a lobe off my cam today, and i need help picking a new one. it has to go in tomm so time is critical. i had a crane energizer, .454 lift 292 dur. the engine is a 388ci stroker, 10.2-1 compresion, 5.7" rods, ported iron heads, 1.6 roller rockers, edlebrock rpm intake and 750 performer carb, GM HEI, dynomax 1 1/5"-3" headers to dual 3" exhuast and flowmaster 40's. this is driven almost everyday so streetablity is very important but of course i would like a good lope and lots of power. thanks for your help, i am pulling out of fla on weds. headed for kansas so of course the timing couldn't be better. kurt __________________ Kurt 03' Trailblazer 69' C10 "SPSHL-K", 388 stroker/BTO 700R4, 2400 stall, 3.73 posi, lwb, fleetside long box, 3.5"/5" drop, 18" Budnik 2000 Yamaha V-Star 1100 Custom For Sale-87' V10-4x4, 408/700r4, 4.10's PM for pics



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.