FS- 1 ton dually rolling chassis.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 10-24-2005, 07:54 PM

Complete rolling chassis.

It's the 133 inch wheelbase.

Frame is 68 model with all 72 model stuff on it front and rear.

Has fresh disc brakes in front with new calipers and pads. Bearings are all good and repacked with fresh grease. Rotors are good.

Rear end is 4.10 with fresh brakes too, out of a 72. I pulled the center section out and cleaned everything and put it together with fresh lube. It looked fine inside. Drums are good shape too.

All 6 tires are good. Has crappy wheels.

Good SM465 trans and bellhousing with factory crossmember. Full driveline from trans to rear end.

Located in DFW.

Price is 400 bucks.

The good disc brake front and dually rear end is worth the price alone. I was driving this truck around till I pulled the sheetmetal and engine off of it.

10-24-2005, 07:54 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	FS- 1 ton dually rolling chassis.... Complete rolling chassis. It's the 133 inch wheelbase. Frame is 68 model with all 72 model stuff on it front and rear. Has fresh disc brakes in front with new calipers and pads. Bearings are all good and repacked with fresh grease. Rotors are good. Rear end is 4.10 with fresh brakes too, out of a 72. I pulled the center section out and cleaned everything and put it together with fresh lube. It looked fine inside. Drums are good shape too. All 6 tires are good. Has crappy wheels. Good SM465 trans and bellhousing with factory crossmember. Full driveline from trans to rear end. Located in DFW. Price is 400 bucks. The good disc brake front and dually rear end is worth the price alone. I was driving this truck around till I pulled the sheetmetal and engine off of it. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.