Cam Choice

[Ole Blue 68]

Ok, I'd like some opinions on this. Which cam would you choose based on the specs? I'll be running a 350 bored .060 over with an RPM intake, 76CC stock heads w/ stock rockers; mostly a daily driver but I'd like to be able to smoke 'em from time to time.

Basic Operating RPM Range: 1,500-5,200 RPM
Intake Duration at 050 inch Lift: 218
Exhaust Duration at 050 inch Lift: 218
Duration at 050 inch Lift: 218 int./218 exh.
Advertised Intake Duration: 284
Advertised Exhaust Duration: 284
Advertised Duration: 284 int./284 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.458
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.458
Valve Lift with Factory Rocker Arm Ratio: 0.458 int./0.458 exh. lift
Lobe Separation (degrees): 110


OR

Basic Operating RPM Range: 1,000-5,500 RPM
Intake Duration at 050 inch Lift: 207
Exhaust Duration at 050 inch Lift: 213
Duration at 050 inch Lift: 207 int./213 exh.
Advertised Intake Duration: 250
Advertised Exhaust Duration: 256
Advertised Duration: 250 int./256 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.437
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.454
Valve Lift with Factory Rocker Arm Ratio: 0.437 int./0.454 exh. lift
Lobe Separation (degrees):