P/S Pump issue - The 1947 - Present Chevrolet & GMC Truck Message Board Network

79BIG10 · 03-10-2006, 01:19 AM

I was changing the oil today and looking at the engine and the belt on the pump was crooked looking. I got to looking and the bolts that hold the pump reservior to the actual bracket were loose. Loose nought to where they are coming into the pulley area

So looks like I'll be borrowing a pulley remover/installer tomorrow from AZ to get that tool. It's been bugging me for awhile since once in awhile I'd hear a noise from it. So I found the problem. Makes me think I want to get a new chrome one instead of fixing that one but I need to either way. This time I'll use some loc-tite on it.

03-10-2006, 01:19 AM	#1
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	P/S Pump issue I was changing the oil today and looking at the engine and the belt on the pump was crooked looking. I got to looking and the bolts that hold the pump reservior to the actual bracket were loose. Loose nought to where they are coming into the pulley area So looks like I'll be borrowing a pulley remover/installer tomorrow from AZ to get that tool. It's been bugging me for awhile since once in awhile I'd hear a noise from it. So I found the problem. Makes me think I want to get a new chrome one instead of fixing that one but I need to either way. This time I'll use some loc-tite on it. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.