Disc brake swap hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beaterC10 · 03-30-2006, 10:14 AM

I have all the parts required to install disk brakes on a 1/2 ton. These were recently removed from an 84 or 86 1/2 ton. You get.

Upper and Lower control arms - need lower ball joints
Spindles, calipers, rotors, brake hoses - 1" thick rotors
Centerlink with pitman and idler arms - need two tie rod ends
Proportioning valve
Master cylinder - alum body, plastic reservoir
Four new rubber bushings for lower control arms

Asking $60 or trade for 73-87 parts. These are heavy, so no shipping.

03-30-2006, 10:14 AM	#1
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Disc brake swap hardware I have all the parts required to install disk brakes on a 1/2 ton. These were recently removed from an 84 or 86 1/2 ton. You get. Upper and Lower control arms - need lower ball joints Spindles, calipers, rotors, brake hoses - 1" thick rotors Centerlink with pitman and idler arms - need two tie rod ends Proportioning valve Master cylinder - alum body, plastic reservoir Four new rubber bushings for lower control arms Asking $60 or trade for 73-87 parts. These are heavy, so no shipping.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.