How do I get this lower - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*bskylerj* · 05-12-2006, 02:18 AM

I need some help and input. This is my 71 Cheyenne Short box. I have bagged the front and rear. I also have 2.5" drop spindles on the front. This a coil spring truck with the trailing arms. I put a set of new snubbers in just incase I lose a bag. This way I can drive it on to a trailer. The rear end is sitting very close to the underneath of the bed.. The front tires sit to close the inner fender wells. I want to go lower but do not want to cut up the truck. Any ideas???? If I have someone Z the frame do I have to lose the inner fenders and cut the bed???
Thanks

05-12-2006, 02:18 AM	#1
bskylerj Account Suspended Join Date: Dec 2005 Location: SPOKANE, WASHINGTON Posts: 1,001	How do I get this lower I need some help and input. This is my 71 Cheyenne Short box. I have bagged the front and rear. I also have 2.5" drop spindles on the front. This a coil spring truck with the trailing arms. I put a set of new snubbers in just incase I lose a bag. This way I can drive it on to a trailer. The rear end is sitting very close to the underneath of the bed.. The front tires sit to close the inner fender wells. I want to go lower but do not want to cut up the truck. Any ideas???? If I have someone Z the frame do I have to lose the inner fenders and cut the bed??? Thanks Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.