Are you SURE???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67Blacksheep · 04-25-2002, 09:24 PM

Gents-
I was informed not to use the 3/4 ton frame mount for the panhard bar when putting in a 1/2 rear-end. But....if the panhard is adjustable, wouldn't it work fine??? The same ones who said not to use it also said that the mounts bolted up the same. This is not the case at all. I spent 2 hours tonight removing the Cherry rivets from the donor 1/2 ton mount that is not in very good shape. Is anyone SURE that the 3/4 frame mount will not work just fine as long as I adjust the panhard to track true on the road??? I'm not lowering or anything, just trying to convert to a usable gear. Any advice would be appreciated. It will save hours of heartache if I can use the existing mount.Thanks in advance for any response!

Sheep

------------------
67 Chevy C20 LB Stepside,
350 4-bolt with goodies.

04-25-2002, 09:24 PM	#1
67Blacksheep Registered User Join Date: Mar 2002 Location: Ohio Posts: 135	Are you SURE???? Gents- I was informed not to use the 3/4 ton frame mount for the panhard bar when putting in a 1/2 rear-end. But....if the panhard is adjustable, wouldn't it work fine??? The same ones who said not to use it also said that the mounts bolted up the same. This is not the case at all. I spent 2 hours tonight removing the Cherry rivets from the donor 1/2 ton mount that is not in very good shape. Is anyone SURE that the 3/4 frame mount will not work just fine as long as I adjust the panhard to track true on the road??? I'm not lowering or anything, just trying to convert to a usable gear. Any advice would be appreciated. It will save hours of heartache if I can use the existing mount.Thanks in advance for any response! Sheep ------------------ 67 Chevy C20 LB Stepside, 350 4-bolt with goodies. __________________ '94 GMC Seirra Ext. Cab '67 Formula Firebird '89 GSX-R 750



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.