Oh no - not another FNG !!!

[Chuck U&R]

Hey! from Moore County, North Carolina.
I'm registered as Chuck U&R. The U&R is Up and Running!!!
It was a website I had around '97 selling Harley parts and I'm too lazy to think up some new snappy handle.
I've got a low low low budget project so I joined the board to look around for parts and advice.
I'm in the process of ressurecting / hot rodding a '76 C-10 rust bucket.
Right now she's blocked up and I'm going thru the brakes. Safety First !
I've also pulled and disposed of the rusted out bed - I'll be adding a flatbed.
I've cut the front springs 1 1/2 coils to get the 235/75 15's up into the wheel wells.
And I'm fixin' to extend the rear shackles to bring the back end down to level.
I've got a 4bbl carb and matching intake coming off Ebay to help the old 305.
The stock steel wheels are primed and ready for a shot of tractor red and the rest of the truck will be John Deere Blitz Black.
I would post a picture now but I'm sure you all know what rust looks like.
Maybe later when I can show some progress.