The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-14-2006, 03:15 PM   #1
pkj
Senior Member
 
Join Date: Jun 2006
Location: waycross ga.
Posts: 438
looking for recommendations

i have 68 long fleet. after looking and reading many of your threads i have decided to go with a 4/6 drop. i am looking for a better than stock ride. what springs are suitable along with shocks and drop kit. will i have drive shaft problems? i will use a set of 20 inch 07 Tahoe wheels and tires. i don't like spacers. what about wheel adapters to correct the off-set and cure the center bore? where can i find these or other suggestions. i would also like to upgrade brakes to power but leave drum/drum. go with used booster or new? where is a reasonable place for drums and wheel cylinders. to extend time on the 307 what can be added to the fuel to save the valve seats? has 3 on tree has anybody upgraded to newer type 5 speed overdrive standard trans and what is involved. truck must remain stick! looking for some of your creative ideas and suggestions. thanks
pkj is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com