84 Tranny question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 07-26-2006, 08:27 PM

My brother is piecing together a 84 p/u that the po removed the engine/tranny. Looking at the driveshaft and shifter on the column we are assuming it had a TH350 (only 3 positions on the shifter and the shaft fit in my bro's 700r4). My bro put a 700R4 out of an early 80's Caprice in it. The truck had a plug on the wiring harness that plugged into the tranny on the drivers side. After reading a thread here I think the tranny it had was a TH350C. If that's the case, will the same circuit that operated the t/c lock on the 350c work on the 700?

07-26-2006, 08:27 PM	#1
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	84 Tranny question My brother is piecing together a 84 p/u that the po removed the engine/tranny. Looking at the driveshaft and shifter on the column we are assuming it had a TH350 (only 3 positions on the shifter and the shaft fit in my bro's 700r4). My bro put a 700R4 out of an early 80's Caprice in it. The truck had a plug on the wiring harness that plugged into the tranny on the drivers side. After reading a thread here I think the tranny it had was a TH350C. If that's the case, will the same circuit that operated the t/c lock on the 350c work on the 700? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.