Looks alot different in here. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

powermad · 08-29-2006, 04:38 PM

Been awhile since I had a puter.
This has been my DD for about 18 months and now with another car to drive I can get to work putting everything on that I have been gathering.

I have a 6" lift and 4.10 3/4 ton axles to go under.
A good set of 69 truck doors that have to be be Blazerfied.
New windsheild and molding
Various sheet metal to be replaced
Winch and mount needs to be installed
Electrical needs ripped out and redone
New body bushings and 1" lift needs installed
And whatever else that pops up along the way.

See ya around
Ron

08-29-2006, 04:38 PM	#1
powermad Hillbilly Hotrod Join Date: Nov 2001 Location: Oregon Posts: 69	Looks alot different in here. Been awhile since I had a puter. This has been my DD for about 18 months and now with another car to drive I can get to work putting everything on that I have been gathering. I have a 6" lift and 4.10 3/4 ton axles to go under. A good set of 69 truck doors that have to be be Blazerfied. New windsheild and molding Various sheet metal to be replaced Winch and mount needs to be installed Electrical needs ripped out and redone New body bushings and 1" lift needs installed And whatever else that pops up along the way. See ya around Ron __________________ 69 K5, .060 over 350/465/205. Last edited by powermad; 08-29-2006 at 04:42 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.