Spindle and front end questions... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

coyote killer · 09-13-2006, 08:11 PM

I bought a 71 that I noticed sat a little low in the front and didn't steer well because the ackerman angle was off. I have rebuilt the entire front end including the steering box and front springs but the ackerman angle is still off and she still sets low in the front.

The only thing that I haven't changed is the spindles. I have bought a pair of 69 spindles to install. Does anyone know if that will fix the problem? I figure the spindles must have been swapped before at some point with the wrong spindles. Thanks!!!

09-13-2006, 08:11 PM	#1
coyote killer Registered User Join Date: Sep 2006 Location: Sacred Heart, Okla. Posts: 14	Spindle and front end questions... I bought a 71 that I noticed sat a little low in the front and didn't steer well because the ackerman angle was off. I have rebuilt the entire front end including the steering box and front springs but the ackerman angle is still off and she still sets low in the front. The only thing that I haven't changed is the spindles. I have bought a pair of 69 spindles to install. Does anyone know if that will fix the problem? I figure the spindles must have been swapped before at some point with the wrong spindles. Thanks!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.