HELP! TRANSFER CASE/Trans ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Eyegore · 10-18-2006, 11:04 PM

Hey guys Toms Son here, Just finsihed my NP203 Trasfer case, and th350 trans now im trying to figure how the brackets go back together,, for example.. there is a Long beam that goes from the passanger side of the transfer case,, but not sure what it bolts up to,,, second off my engine mounts have on both sides a long bracket that drops from the side of the engine to the flywheel wheel cover,, but they are different which one goes on which side,,,and last off are there little 1 inch spacers that go between the frame and the bracket that holds the trans/transcase.. if anyone has any pics or GM specs, I would be VERY thankfull!

OHH and when i can Ill post some pics of the complete Power Plant..
Thx Everyone!

10-18-2006, 11:04 PM	#1
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	HELP! TRANSFER CASE/Trans ??? Hey guys Toms Son here, Just finsihed my NP203 Trasfer case, and th350 trans now im trying to figure how the brackets go back together,, for example.. there is a Long beam that goes from the passanger side of the transfer case,, but not sure what it bolts up to,,, second off my engine mounts have on both sides a long bracket that drops from the side of the engine to the flywheel wheel cover,, but they are different which one goes on which side,,,and last off are there little 1 inch spacers that go between the frame and the bracket that holds the trans/transcase.. if anyone has any pics or GM specs, I would be VERY thankfull! OHH and when i can Ill post some pics of the complete Power Plant.. Thx Everyone! __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454 Last edited by Eyegore; 10-18-2006 at 11:07 PM. Reason: Cant Type!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.