12-16-2006, 03:48 AM | #1 |
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Air Bag Shopping List
i have a 69 lwb that i will be baggin this winter/spring. it was a 3/4 truck, but the PO converted it to 1/2 and put disk brakes up front. I have no clue what year/model was used, so i'm concerned that i might get the wrong spindle.
Anyways, here's my list: 4 Slam Specialties bags - http://*****************/SlamSpecialt...SinglePort.php Front Plates - http://*****************/67-87Fullsiz...rtBrackets.php Rear Plates (Do I need these if my coil mounts are good?) - http://*****************/RearUpperBag...SinglePort.php 100' of Air Line (rather have to much than not enough) - http://*****************/100ftof38DOT...cedAirLine.php 4 Gauges - still looking - gonna get something to match whatever i pick for my gauge cluster i'm workin on. ECC Drop Member - $199 ECC Shock Relo kit with shocks - $199 Panhard Bar - http://*****************/PanhardBarKit.php C-Notch - From another member CPP 2.5 inch drop spindles - http://www.classicperform.com/Store/...ruck/CP4S1.htm CPP Front and Rear Sway Bar Kit - http://www.classicperform.com/Store/...ck/6372SBK.htm CPP Front Sway Bar Brackets - http://www.classicperform.com/Store/...ck/6372LSB.htm For the air line fittings, I was planning to order everything from SuicideDoors. For each bag, i think i will need the following, starting from the bag and getting into the cab (http://*****************/Fittings.php): Forged 90 Degree Elbow Male Female Connector line Male Elbow Bulkhead - mounted to cab floor/firewall (not sure where yet) line Union Tee line A goes to gauge line B goes to input valve I have no clue what i need for valves. I assumed i would have something just like a tire valve where i can add air, or press in the needle to let air out. I didn't see anything like that at suicidedoors though. So that about wraps up my suspension project. See anything i'm missing or something i should rethink?? |
Bookmarks |
|
|